DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130 modem with the Vigor 2862n router.

  • wfcguard
  • Topic Author
  • Offline
  • New Member
  • New Member
More
01 Nov 2019 19:37 #95150 by wfcguard
I wanted to use a Vigor 130 modem with the Vigor 2862n router. I plugged the ADSL cable into the Vigor 130 then ran a cable over to WAN 2 port on the Vigor 2862. Inputted the ISP login details into the Vigor 2862 but the DSL light never goes solid. When I bypass the modem and go straight to the WAN 1 port with the ADSL cable in the Vigor 2862n router, and thus use the integrated modem on the Vigor 2862n it goes solid and I'm connected. Is there something I have to do in the Vigor 130 settings as I heard it was plug and play. Any advice would be great. Thanks .

Please Log in or Create an account to join the conversation.

More
02 Nov 2019 08:56 #95153 by piste basher
Replied by piste basher on topic Re: Vigor 130 modem with the Vigor 2862n router.
If you are in the mainland UK and you have a UK model 130 which is "out of the box" then it should be plug and play. You are using the PPPoE page for your username and password?

Please Log in or Create an account to join the conversation.

  • wfcguard
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Nov 2019 14:50 #95154 by wfcguard
I am in the UK ... I got it working after I installed the latest firmware, and it was plug and play. Thanks for your reply, I appreciate it.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami