DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2920 - Routing strange behaviour

  • draynet
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Oct 2019 23:41 #95023 by draynet
If I setup V2910 with the same rules it switches to WAN1/WAN2 according to them but
V2920 fw 3.8.8.3 hangs for 192.168.1.2.
I setup any protocols /dest IP / Ports from IP src 192.168.0.2~192.168.0.2 to WAN2 (1st rule)
Second rule is any protocols /dest IP / Src IP/ Ports to WAN1 for all other clients
If I enable 1st rule I cannot connect from 192.168.0.2 over WAN2.
Default routing table is
* 0.0.0.0/ 0.0.0.0 via 172.16.1.1 WAN1
* 192.168.1.1/ 255.255.255.255 via 192.168.1.1 WAN2
C 192.168.1.0/ 255.255.255.252 directly connected WAN2
C~ 192.168.0.0/ 255.255.255.0 directly connected LAN1
C 172.16.1.0/ 255.255.255.252 directly connected WAN1

On V2910 everything works correctly with the same routing table and Load balance rules.
On V2920 Both WAN ports Always On According to line speed IP based policy.(although I've checked all compinations with no success). Both WAN connections active.
FW Bug?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami