DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 3900 Coprocessor CPU 100%
- rcookdps
- Topic Author
- Offline
- Banned
Less
More
- Posts: 2
- Thank yous received: 0
16 Aug 2019 10:55 #94870
by rcookdps
Vigor 3900 Coprocessor CPU 100% was created by rcookdps
Since updating to firmware 1.4.4 the co processor CPU has maxed out at 100% on two occasions in the last week. All VPNs stop working when this happens, tunnel shows as up but no traffic.
The only way I can resolve the issue is to reboot the firewall, once rebooted the VPNs dont work and I have to manually start the service using the web console - restart IPSEC
Is it possible to downgrade the firmware on these firewalls?
The only way I can resolve the issue is to reboot the firewall, once rebooted the VPNs dont work and I have to manually start the service using the web console - restart IPSEC
Is it possible to downgrade the firmware on these firewalls?
Please Log in or Create an account to join the conversation.
- rcookdps
- Topic Author
- Offline
- Banned
Less
More
- Posts: 2
- Thank yous received: 0
16 Aug 2019 14:21 #94874
by rcookdps
Replied by rcookdps on topic Re: Vigor 3900 Coprocessor CPU 100%
Opened a support ticket with Draytek and they advised I downgraded the firmware back to 1.4.3
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek