DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2862n & Vigor 130 Modem or BT FTTC

  • bengukcpat
  • Topic Author
  • Offline
  • New Member
  • New Member
More
09 Apr 2019 08:24 #94349 by bengukcpat
Draytek 2862n & Vigor 130 Modem or BT FTTC was created by bengukcpat
Hi All,


Has anyone had any issues with using Vigor 130 Modems with a 2862n?


Had two customers now where we've put these in with a Vigor130 to operate a second VDSL in load balancing. But in both cases once both lines are enabled one (usually the one on the 130) stops working or just connects and disconnects which then sends the load balancing logic into a spin.


Both lines set to load balance and always on.



Also had some issues with getting a BT FTTC Modem (UK) going which also normally works fine. In both cases tried on 3.8.9 and 3.9.0 builds and still had issues.


For one customer i swapped in a 2862 (non wireless version) and this seemed to work fine.



Any help would be great

THanks

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami