DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2862n WiFi performance awful
- andylarks
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank yous received: 0
09 Feb 2019 15:45 #93974
by andylarks
2862n WiFi performance awful was created by andylarks
So plugged in to the router I get ~80Mb download
Over wifi (when stood next to the router) I get a maximum of 5Mb
So frustrated, can't find what the issue is - other than perhaps a faulty router....but 2 faulty routers in a row seems unlikely?
I'm running the latest firmware.
Not a particularly busy WiFi area (not competing particularly)
No bandwidth management enabled (so far as I can tell!)
Any ideas?!
A.
Over wifi (when stood next to the router) I get a maximum of 5Mb
So frustrated, can't find what the issue is - other than perhaps a faulty router....but 2 faulty routers in a row seems unlikely?
I'm running the latest firmware.
Not a particularly busy WiFi area (not competing particularly)
No bandwidth management enabled (so far as I can tell!)
Any ideas?!
A.
Please Log in or Create an account to join the conversation.
- andylarks
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank yous received: 0
09 Feb 2019 19:09 #93977
by andylarks
Replied by andylarks on topic Re: 2862n WiFi performance awful
OK, scratch that, figured it out.
I have 19 devices connected - and roughly 55Mb bandwidth available.
That works out at roughly 3Mb each
...although, that suggests everything is trying to consume 4Mb or more. Seems unlikely, so perhaps some "bad actors" taking up more than their fair share.
I have 19 devices connected - and roughly 55Mb bandwidth available.
That works out at roughly 3Mb each
...although, that suggests everything is trying to consume 4Mb or more. Seems unlikely, so perhaps some "bad actors" taking up more than their fair share.
Please Log in or Create an account to join the conversation.
- oakserver
- Offline
- Junior Member
Less
More
- Posts: 41
- Thank yous received: 0
10 Feb 2019 15:05 #93981
by oakserver
I would try using the menu option Diagnostics / Data Flow Monitor (and enable it) to establish how much bandwidth is being consumed by each device.
Replied by oakserver on topic Re: 2862n WiFi performance awful
OK, scratch that, figured it out.andylarks wrote:
I have 19 devices connected - and roughly 55Mb bandwidth available.
That works out at roughly 3Mb each
...although, that suggests everything is trying to consume 4Mb or more. Seems unlikely, so perhaps some "bad actors" taking up more than their fair share.
I would try using the menu option Diagnostics / Data Flow Monitor (and enable it) to establish how much bandwidth is being consumed by each device.
Please Log in or Create an account to join the conversation.
- admin3
- Offline
- Site Admin
Less
More
- Posts: 604
- Thank yous received: 0
11 Feb 2019 10:26 #93990
by admin3
Forum Administrator
Replied by admin3 on topic Re: 2862n WiFi performance awful
Do try different wireless channels to see if that helps, you should still be able to use the full bandwidth when close to the router. The bandwidth is only being shared like that if every device is communicating at the same time.
If there are lots of wireless networks nearby, you could set the channel mode to 20MHz only, which can sometimes help. That's done from the [WLAN] > [Advanced Settings] menu.
If there are lots of wireless networks nearby, you could set the channel mode to 20MHz only, which can sometimes help. That's done from the [WLAN] > [Advanced Settings] menu.
Forum Administrator
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek