DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2762AC

  • esoxecosse
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Dec 2018 20:51 #93626 by esoxecosse
Vigor 2762AC was created by esoxecosse
Hi there, just bought this vdsl router and it hasn't arrived yet, was wondering is it possible to turn off all the led's as it's gonna be in a bedroom..?

Cheers

MarkC

Please Log in or Create an account to join the conversation.

More
28 Dec 2018 23:06 #93627 by admin
Replied by admin on topic Re: Vigor 2762AC
You can on the wireless access points, so maybe on the routers too but not sure. Check settings but otherwise ask support once it arrives...or use tape :-)

Forum Administrator

Please Log in or Create an account to join the conversation.

  • esoxecosse
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Dec 2018 23:52 #93628 by esoxecosse
Replied by esoxecosse on topic Re: Vigor 2762AC
Hi thanks for the reply, I see it's an option on the 2862 with the later firmware so hopefully it's been included on my one, or will need to break out the dreaded duck tape..lol

Cheers

MarkC

Please Log in or Create an account to join the conversation.

More
17 Jan 2019 17:28 #93739 by paulbds
Replied by paulbds on topic Re: Vigor 2762AC
New firmware just released v 3.9.0

going to try it this evening and see if it orins out some of its bugs.....

[ redacted by admin. FW not UK tested yet ]

Please Log in or Create an account to join the conversation.

More
17 Jan 2019 18:07 #93742 by admin
Replied by admin on topic Re: Vigor 2762AC
3.9.0 has not been tested/approved for the UK yet so I've removed the previous post.

Please should always refer to original source for firmware and release notes.

Forum Administrator

Please Log in or Create an account to join the conversation.

More
18 Jan 2019 14:33 #93747 by paulbds
Replied by paulbds on topic Re: Vigor 2762AC
No problem

apologies to admins

paul

Please Log in or Create an account to join the conversation.

Moderators: Chris