DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Open Port 443 to point to internal server & VPN Troubles

More
20 Sep 2018 21:27 #92979 by mbames
Replied by mbames on topic Re: Open Port 443 to point to internal server & VPN Troubles

akwe-xavante wrote:

In addition the router will not open port 443 and point it to my server, on clicking ok to apply the settings i'm directed to the "System Maintenance > Management" page where theres nothing to do



On the system management page:
IP v4
Internet access control, ensure that HTTPS server is unticked
Management Port Setup, select User Defined Ports, HTTPS port is something other than 433

IP v6
Allow management from the internet is unticked

LAN Access setup
Tick required options (default is all, apart from enforce HTTPS access)
Apply to all subnets, DMZ and IP routed subnet

Please Log in or Create an account to join the conversation.

  • akwe-xavante
  • Topic Author
  • Offline
  • Member
  • Member
More
21 Sep 2018 07:36 #92982 by akwe-xavante
Replied by akwe-xavante on topic Re: Open Port 443 to point to internal server & VPN Troubles
Thank you to all that have replied.

On the system management page:
IP v4
Internet access control, ensure that HTTPS server is unticked
Management Port Setup, select User Defined Ports, HTTPS port is something other than 433

IP v6
Allow management from the internet is unticked

LAN Access setup
Tick required options (default is all, apart from enforce HTTPS access)
Apply to all subnets, DMZ and IP routed subnet



Only one thing i hadn't tried was unticking everything under IP v6, tried all under IP4, 6 and LAN together as suggested here and i still get the problem.

A factory reset is a good idea, not thought of this one, then set up port 443 first perhaps, something to try after the weekend.

Please Log in or Create an account to join the conversation.

More
21 Sep 2018 07:38 #92983 by spellbinder
Replied by spellbinder on topic Re: Open Port 443 to point to internal server & VPN Troubles
Yep, try actually to flash the router with the firmware rst file ;)

Please Log in or Create an account to join the conversation.

  • akwe-xavante
  • Topic Author
  • Offline
  • Member
  • Member
More
21 Sep 2018 07:45 #92984 by akwe-xavante
Replied by akwe-xavante on topic Re: Open Port 443 to point to internal server & VPN Troubles

Yep, try actually to flash the router with the firmware rst file ;)



Will do, another good idea, belt and brases perhaps but why not, it only takes a few minutes to do

Please Log in or Create an account to join the conversation.

More
21 Sep 2018 08:04 #92985 by spellbinder
Replied by spellbinder on topic Re: Open Port 443 to point to internal server & VPN Troubles
Just need to get the file from the latest firmware archive then it takes a couple of seconds to flash it ;)

Please Log in or Create an account to join the conversation.

More
21 Sep 2018 08:19 #92986 by hopkins35
Replied by hopkins35 on topic Re: Open Port 443 to point to internal server & VPN Troubles
Would it not be better to try downgrading to v3.8.8.8 to rule out a firmware gremlin, bearing in the various reports of issues with the latest versions, before doing a factory reset? It's safe to downgrade, you won't wipe out your settings and it may potentially solve your problem! You could then reflash and reset if that doesn't work for you.

Please Log in or Create an account to join the conversation.

Moderators: Chris