DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor V130 in Bridge Mode - can I access the GUI?

  • fireblade
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Jul 2018 16:15 #92430 by fireblade
I have recently purchased a V130 and, since I want to use it with BT IPTV, I have followed the Draytek guidance and set it into Bridge Mode. All is working just fine, including all the BT TV IP channels.

My question is, whilst the modem is in Bridge Mode, is it possible to also have access to the V130 GUI for monitoring purposes and/or updating firmware? Does the V130 GUI interface have an IP address when in Bridge Mode - does the default address of 192.168.2.1 still hold? Or do I have to reset, then do it all with a 1-1 connected PC?

FYI, in my installation, the V130 is followed by a Ubiquiti USG router.

Many thanks in advance.

Please Log in or Create an account to join the conversation.

More
More
07 Aug 2018 19:55 #92501 by the pit
If you enable tagging on BT your 130 will disconnect so the method linked wont work.

Please Log in or Create an account to join the conversation.

More
07 Aug 2018 20:37 #92502 by ccarmock
Draytek really need to have a tagging method that isn't automatically passed tot he ISP here but for management purposes.....

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami