DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Make 2860 a modem to use Pfsense

  • dazza1234
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
11 May 2018 22:08 #91518 by dazza1234
Make 2860 a modem to use Pfsense was created by dazza1234
Hi I hope someone can help me I want to run pfsense. So I need the 2860 to be a Modem and Pfsense to have that wan connection to it as Pfsense is going to do all the lan firewall and routing for it, I’m with Zen Internet on FTTC so a VDSL2 connection. Thanks in advance

Please Log in or Create an account to join the conversation.

More
13 May 2018 13:59 #91524 by silverstreak_2006
Replied by silverstreak_2006 on topic Re: Make 2860 a modem to use Pfsense
Are you not able to bridge?

Please Log in or Create an account to join the conversation.

  • dazza1234
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 May 2018 10:30 #91528 by dazza1234
Replied by dazza1234 on topic Re: Make 2860 a modem to use Pfsense
Hi Pete’

For some reason that wasn’t working I’ll have to go back over it but, the lan does the Authentication when in bridge mode via pppoe?. Question can I have more than pppoe client device authenticate a connection

Please Log in or Create an account to join the conversation.

More
14 May 2018 18:26 #91530 by silverstreak_2006
Replied by silverstreak_2006 on topic Re: Make 2860 a modem to use Pfsense
Dazza

I'm not sure, What firmware version are you on?

Please Log in or Create an account to join the conversation.

  • dazza1234
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 May 2018 02:11 #91532 by dazza1234
Replied by dazza1234 on topic Re: Make 2860 a modem to use Pfsense

silverstreak_2006 wrote: Dazza

I'm not sure, What firmware version are you on?



Hi Pete’ I’m running firmware 3.8.6

Please Log in or Create an account to join the conversation.

More
15 May 2018 18:18 #91539 by silverstreak_2006
Replied by silverstreak_2006 on topic Re: Make 2860 a modem to use Pfsense
Try

https://www.draytek.co.uk/support/downloads/vigor-2860

Please Log in or Create an account to join the conversation.

Moderators: Chris