DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DNS displayed

  • aimdev
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Apr 2018 07:22 #91383 by aimdev
DNS displayed was created by aimdev
Hi

On the LAN 1 Ethernet TCP / IP and DHCP Setup Page I have two non-isp dns addresses set up.

When the line is connected, on the Online Status Physical Connection I see the isp's dns addresses,
when it disconnects, I see the two non dns addresses.
Checking on the PC, I see , when connected, the non-isp addresses.

Confused am I.

Aimee

Please Log in or Create an account to join the conversation.

More
21 Apr 2018 17:16 #91385 by admin
Replied by admin on topic Re: DNS displayed
So...it's working as it should, the PC getting the right address
but it's just the router's web interface showing the ISP ones when connect? i.e. this is purely a costmetic issue for you?

Forum Administrator

Please Log in or Create an account to join the conversation.

More
23 Apr 2018 23:05 #91397 by clivers
Replied by clivers on topic Re: DNS displayed
Are you wanting to use the same public DNS on both connections? If so go to Lan>General Setup> Force router to use "DNS server IP address" settings specified in LanX Tick box and check DNS on that lan is what you want.

Please Log in or Create an account to join the conversation.

  • aimdev
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Apr 2018 19:09 #91409 by aimdev
Replied by aimdev on topic Re: DNS displayed

admin wrote: So...it's working as it should, the PC getting the right address
but it's just the router's web interface showing the ISP ones when connect? i.e. this is purely a costmetic issue for you?


No, just confusing.

Please Log in or Create an account to join the conversation.

  • aimdev
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Apr 2018 19:10 #91410 by aimdev
Replied by aimdev on topic Re: DNS displayed

clivers wrote: Are you wanting to use the same public DNS on both connections? If so go to Lan>General Setup> Force router to use "DNS server IP address" settings specified in LanX Tick box and check DNS on that lan is what you want.


Hi

Thanks, looks like its sorted.

Aimee

Please Log in or Create an account to join the conversation.

Moderators: Chris