DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860 v3.8.7
- mike.smith
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 60
- Thank you received: 0
22 Mar 2018 20:01 #91176
by mike.smith
Replied by mike.smith on topic Re: 2860 v3.8.7
It’s on the .com site, still there, I just checked.
Please Log in or Create an account to join the conversation.
- silverstreak_2006
- Offline
- Member
Less
More
- Posts: 145
- Thank you received: 0
22 Mar 2018 21:29 #91177
by silverstreak_2006
Replied by silverstreak_2006 on topic Re: 2860 v3.8.7
The only issues I saw was on an Ln model where the bind had switched itself off. My N-plus has (at least I think) been ok.
The only thing was the reboots, which I will see after a week or so if it restarts again.
The only thing was the reboots, which I will see after a week or so if it restarts again.
Please Log in or Create an account to join the conversation.
- icornish
- Offline
- Junior Member
Less
More
- Posts: 18
- Thank you received: 0
25 Mar 2018 07:34 #91189
by icornish
Yep, found it... I was only looking at the UK site
Now running on 3.8.7 VT3, which appears to be rock solid. I used to have occasional problems with IP binding with my work laptop (uses MS DirectAccess) reporting IP conflicts (with itself!), but now no more.
So far up time of 3 days... so quite good... used to only get 48 hours before a reboot, though admittedly, most teenagers are not currently at home, so load has been far lower than normal.
Replied by icornish on topic Re: 2860 v3.8.7
It’s on the .com site, still there, I just checked.mike.smith wrote:
Yep, found it... I was only looking at the UK site
Now running on 3.8.7 VT3, which appears to be rock solid. I used to have occasional problems with IP binding with my work laptop (uses MS DirectAccess) reporting IP conflicts (with itself!), but now no more.
So far up time of 3 days... so quite good... used to only get 48 hours before a reboot, though admittedly, most teenagers are not currently at home, so load has been far lower than normal.
Please Log in or Create an account to join the conversation.
- mike.smith
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 60
- Thank you received: 0
25 Mar 2018 07:51 #91190
by mike.smith
Replied by mike.smith on topic Re: 2860 v3.8.7
Running VT 4 here, no problems
Please Log in or Create an account to join the conversation.
- ccarmock
- Offline
- Junior Member
Less
More
- Posts: 80
- Thank you received: 0
27 Mar 2018 13:15 #91199
by ccarmock
Replied by ccarmock on topic Re: 2860 v3.8.7
The UK version has been released now
Please Log in or Create an account to join the conversation.
- icornish
- Offline
- Junior Member
Less
More
- Posts: 18
- Thank you received: 0
27 Mar 2018 21:26 #91202
by icornish
Curious... Why VT4? Are you not on a standard BT ADSL type connection?
Replied by icornish on topic Re: 2860 v3.8.7
Running VT 4 here, no problemsmike.smith wrote:
Curious... Why VT4? Are you not on a standard BT ADSL type connection?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek