DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can't access Vigor 120

  • philm66
  • Topic Author
  • Offline
  • New Member
  • New Member
More
22 Feb 2018 16:20 #90846 by philm66
Can't access Vigor 120 was created by philm66
Hi

I have a Vigor 120 that doesn't appear to be working properly (at least I think it isn't)

When I turn it on and connect a PC to the LAN port the LAN light will come on for a few seconds and an IP address of 192.168.2.10 gets pushed to the PC after a few more seconds the LAN light goes out and I then have no connection between PC and the 120. If I leave it a while longer it will establish a connection again and then disconnect it again.

Have tried factory resetting it but the same thing....if I'm quick enough when it's showing as connected I can get to the web interface ( 192.168.2.1 ) briefly, but then obviously lose it when it disconnects.

Any idea's?

Phil

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami