DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Network freezing since introducing AP902

  • roybridge
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Nov 2017 22:54 #90022 by roybridge
Network freezing since introducing AP902 was created by roybridge
Hi, I have a 2860ac which has worked great for ages. I have an Apple AirPort Extreme and Time Capsule which up until recently were acting as my WiFi access points.

However, a few weeks ago I purchased an AP902 with the purpose of centrally managing my WiFi. I have disabled the WiFi on my Apple products and now rely on the DrayTek equipment alone.

I’ve been experiencing some network freezing, where the only fix is to reboot the AP902. This has only happened since introducing the AP902, and I wonder if I might have misconfigured it? ALL networked devices are affected when the freeze happens - wired as well as wireless.

The AP902 is on firmware 1.2.3 and the 2860ac on 3.8.5

The AP902 is set to Enable AP Management and Enable Auto Provision, and the Operating Mode on both 2.4 and 5GHz is “AP”. Does that sound correct?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami