DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can a 2862 use a 2860 saved config ?

  • steveburke
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Nov 2017 10:32 #90001 by steveburke
Can a 2862 use a 2860 saved config ? was created by steveburke
As the subject says, can a configuration backed up from a 2860 (n plus, to be specific) be restored to a 2862 ?

Thanks, Steve

Please Log in or Create an account to join the conversation.

More
10 Nov 2017 10:46 #90002 by admin3
Replied by admin3 on topic Re: Can a 2862 use a 2860 saved config ?
It can, I've just successfully upgraded a Vigor 2860 on 3.8.5 firmware to a Vigor 2862 on 3.8.7 firmware. Be aware though, because the physical ports are different, the VLAN configuration may need to be reconfigured for the Vigor 2862's port layout.

I am aware of an issue with importing a configuration from the 2860's 3.8.5 firmware (which is a requirement for the 2862's configuration import) into the 2862's 3.8.6 firmware, but it appears 3.8.7 fixes that, which will be available on DrayTek UK within a few days.

Forum Administrator

Please Log in or Create an account to join the conversation.

  • steveburke
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Nov 2017 12:21 #90003 by steveburke
Replied by steveburke on topic Re: Can a 2862 use a 2860 saved config ?
Perfect! Many thanks for the quick response.

Please Log in or Create an account to join the conversation.

Moderators: Chris