DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130 speed drop off

More
07 Nov 2017 07:01 #89990 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 speed drop off

apotts wrote: I used to sync at 48 or 50, then the line fault (crackling) caused the speed to gradually drop to 34. After it was fixed it went up to 44, but even after 3 months it will not go any higher. So it does go up, but it seems to have a very long term memory...

I have spoken to my ISP about this - and they would dearly love to be able to reset the connection. I have spoken to numerous OR engineers, who also would like to be able to do this, but can't because they are not "network" engineers (ie they are the ones who fix regular line faults but are not allowed to do fancy network stuff).

It's almost worth conjuring up a fake network fault, just so you can pay the £80 to get an engineer out to do the reset...



Given your line stats you are getting a good speed. Many areas lose speed due to crosstalk which increases as more lines go live with vdsl . You can't expect much more from your line as you are on a 40/10 package .

If G.Fast or Vectoring come along speeds will improve.

Please Log in or Create an account to join the conversation.

More
07 Nov 2017 07:53 #89991 by apotts
Replied by apotts on topic Re: Vigor 130 speed drop off
Actually, I'm not on the 40/10, and I live in a rural area with not many others connected to this box.

I'd just like to get it to connect at 6db again, as it did before the line fault.

Please Log in or Create an account to join the conversation.

More
07 Nov 2017 10:16 #89992 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 speed drop off

apotts wrote: Actually, I'm not on the 40/10, and I live in a rural area with not many others connected to this box.

I'd just like to get it to connect at 6db again, as it did before the line fault.



Hmm, your upstream is 10MB , which ISP are you with?

Can you post the output of " vdsl status more " ?

Please Log in or Create an account to join the conversation.

More
07 Nov 2017 10:57 #89993 by apotts
Replied by apotts on topic Re: Vigor 130 speed drop off
Plusnet. I understand that my US speed is limited by range/SNR etc, not product.

Code:
> vdsl status ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Running Mode : 17A State : SHOWTIME DS Actual Rate : 43999000 bps US Actual Rate : 10812000 bps DS Attainable Rate : 54672432 bps US Attainable Rate : 10816000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 1 US Interleave Depth : 1 NE Current Attenuation : 22 dB Cur SNR Margin : 8 dB DS actual PSD : 7. 8 dB US actual PSD : 12. 8 dB NE CRC Count : 0 FE CRC Count : 1231 NE ES Count : 0 FE ES Count : 1022 Xdsl Reset Times : 0 Xdsl Link Times : 3 ITU Version[0] : b5004946 ITU Version[1] : 544e0000 VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support] Power Management Mode : DSL_G997_PMS_L0 Test Mode : DISABLE -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 32 dB Far SNR Margin : 6 dB CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da48c DSLAM CHIPSET VENDOR : < BDCM > > vdsl st more ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Near End Far End Note Trellis : 1 1 Bitswap : 1 1 ReTxEnable : 1 1 VirtualNoise : 0 0 20BitSupport : 0 0 LatencyPath : 0 0 LOS : 2 0 LOF : 0 0 LPR : 0 2 LOM : 0 0 SosSuccess : 0 0 NCD : 0 0 LCD : 0 0 FECS : 0 0 (seconds) ES : 0 1022 (seconds) SES : 0 18 (seconds) LOSS : 0 0 (seconds) UAS : 29 12085 (seconds) HECError : 0 0 CRC : 0 1231 RsCorrection : 0 0 INP : 245 215 (symbols) InterleaveDelay : 0 14 (1/100 ms) NFEC : 32 32 RFEC : 16 16 LSYMB : 16 16 INTLVBLOCK : 32 32 AELEM : 0 ----

Please Log in or Create an account to join the conversation.

More
07 Nov 2017 12:44 #89994 by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 speed drop off

apotts wrote: Plusnet. I understand that my US speed is limited by range/SNR etc, not product.

Code:
> vdsl status -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 32 dB Far SNR Margin : 6 dB CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da48c DSLAM CHIPSET VENDOR : < BDCM > > vdsl st more ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Near End Far End Note Trellis : 1 1 Bitswap : 1 1 ReTxEnable : 1 1 VirtualNoise : 0 0 20BitSupport : 0 0 LatencyPath : 0 0 LOS : 2 0 LOF : 0 0 LPR : 0 2 LOM : 0 0 SosSuccess : 0 0 NCD : 0 0 LCD : 0 0 FECS : 0 0 (seconds) ES : 0 1022 (seconds) SES : 0 18 (seconds) LOSS : 0 0 (seconds) UAS : 29 12085 (seconds) HECError : 0 0 CRC : 0 1231 RsCorrection : 0 0 INP : 245 215 (symbols) InterleaveDelay : 0 14 (1/100 ms) NFEC : 32 32 RFEC : 16 16 LSYMB : 16 16 INTLVBLOCK : 32 32 AELEM : 0 ----




1) Plusnet apparently limit users to 10MB upstream.

2) See the ReTxEnable ? That is G.INP the new version of interleaving , that is running because the DLM system is seeing noise/errors on your line.

Have you tried listening to your line with a phone connected direct to the Test Socket [inside back of Master Socket] ? You could also try the modem connected the Test Socket, see if that changes anything.

Please Log in or Create an account to join the conversation.

More
07 Nov 2017 13:33 #89995 by apotts
Replied by apotts on topic Re: Vigor 130 speed drop off
I have "unlimited fibre extra" which is 80/20. No cap at 10!

I have had a faulty line (crackling) for 9 months. It was finally fixed 3 months ago - so I am familiar with all the usual tests (it's still connected to the test socket - I only have the one socket in the house). The line now is clear and perfect. I imagine G.INP was selected when the line was barely audible.

I really need the line to be reset, but there appears to be no mechanism to do so.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami