DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 130 Sky Fibre setup help please
- sygad1
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
13 Oct 2017 07:25 #89819
by sygad1
Vigor 130 Sky Fibre setup help please was created by sygad1
Hi All,
I have read, (nearly everything ) about getting the Vigor 130 up and running with Sky fibre max but for the life of me I can't get mine working.
I want to simply connect my Macbook to the 130 and get onto the internet, eventually integrating this into my home network with a switch and Unifi USG, but that's a problem for another day.
I have noticed from previous issues posted that my Vigor 130 seems to have a different admin interface, I suspect that is just a firmware update.
Steps taken:
Updated firmware to 3.8.1.2
Internet access > General setup > DSL Mode - "VDSL2 Only"
Rebooted
Internet access > MPoA / Static or Dynamic IP - "Enabled"
"Noticed that the Bridge mode and MAC address options became temporarily editable"
Rebooted
This is where I had to "guess/work out" the differences in the interface to enter the 60/61 information (numbers changed for obvious reasons)
Internet access > MPoA / Static or Dynamic IP > Advanced
Option number: 60
Data type: Ascii Character "2.01.1850.R|001|ER110|AC12345A123456"
Option number: 61
Data type: Ascii Character "a12a1aa12345@skydsl|123a12a1"
I left the DHCP options alone for now as it's connected directly to my laptop.
Is there anything I am doing wrong or are there additional steps I need to take?
Cheers or any help
I have read, (nearly everything
I want to simply connect my Macbook to the 130 and get onto the internet, eventually integrating this into my home network with a switch and Unifi USG, but that's a problem for another day.
I have noticed from previous issues posted that my Vigor 130 seems to have a different admin interface, I suspect that is just a firmware update.
Steps taken:
Updated firmware to 3.8.1.2
Internet access > General setup > DSL Mode - "VDSL2 Only"
Rebooted
Internet access > MPoA / Static or Dynamic IP - "Enabled"
"Noticed that the Bridge mode and MAC address options became temporarily editable"
Rebooted
This is where I had to "guess/work out" the differences in the interface to enter the 60/61 information (numbers changed for obvious reasons)
Internet access > MPoA / Static or Dynamic IP > Advanced
Option number: 60
Data type: Ascii Character "2.01.1850.R|001|ER110|AC12345A123456"
Option number: 61
Data type: Ascii Character "a12a1aa12345@skydsl|123a12a1"
I left the DHCP options alone for now as it's connected directly to my laptop.
Is there anything I am doing wrong or are there additional steps I need to take?
Cheers or any help
Please Log in or Create an account to join the conversation.
- adrianh54
- Offline
- Member
Less
More
- Posts: 428
- Thank you received: 0
15 Oct 2017 19:14 #89832
by adrianh54
Replied by adrianh54 on topic Re: Vigor 130 Sky Fibre setup help please
Where did you get your Vigor 130 from?
There should be no differences in GUI on UK models.
A screenshot of your GUI might help.
There should be no differences in GUI on UK models.
A screenshot of your GUI might help.
Please Log in or Create an account to join the conversation.
- darrencousins
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
07 Jan 2018 18:07 #90335
by darrencousins
Replied by darrencousins on topic Re: Vigor 130 Sky Fibre setup help please
I got the Vigor from Amazon.
My mistake about the screenshots, I was looking at the Draytek router screenshots.
I configured my Macbook with the following settings:
And the Vigor 130 with these settings, based of this thread -http://forums.thinkbroadband.com/sky/4478222-vigor-130-and-2925.html
I can't get onto the internet, any ideas?
Cheers
My mistake about the screenshots, I was looking at the Draytek router screenshots.
I configured my Macbook with the following settings:
And the Vigor 130 with these settings, based of this thread -
I can't get onto the internet, any ideas?
Cheers
Please Log in or Create an account to join the conversation.
- paulbds
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
14 Feb 2018 23:43 #90734
by paulbds
Replied by paulbds on topic Re: Vigor 130 Sky Fibre setup help please
Funny, I am having problems with my Vigor 130 (from Amazon)
Did you buy it from NetXL by any chance
?
Paul
Did you buy it from NetXL by any chance
?
Paul
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
17 Feb 2018 12:57 #90765
by admin
Forum Administrator
Replied by admin on topic Re: Vigor 130 Sky Fibre setup help please
As far as I know, NetXL sell legit/UK spec products so that's not the issue.
The box would always say 'UK' on it.
Just speak to support.
The box would always say 'UK' on it.
Just speak to support.
Forum Administrator
Please Log in or Create an account to join the conversation.
- marcellus305
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
01 Mar 2021 06:39 #98670
by marcellus305
Replied by marcellus305 on topic Re: Vigor 130 Sky Fibre setup help please
Did this issue ever get resolved? I have the exact same issue.
I have raised a Ticket with Support but have had no response.
Thanks
I have raised a Ticket with Support but have had no response.
Thanks
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek