DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Bitwap disable Syntax

  • oakserver
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 Jul 2017 16:53 #89239 by oakserver
Bitwap disable Syntax was created by oakserver
Hi,

I want to disable bitswap on the upstream only because it seems when Bitswap enables my CRC errors start occurring.

I found a telnet command that seems to do that but would like to clarify a couple of points:

1) If i change the setting will this take effect permanently or until the next reboot

2) Can someone help me with the syntax for disabling bitswap on the upstream. I found the command vdsl open optn and the documentation below but can't seem to form the command into an acceptable string.

Thank you in advance for any kind people that could help me with this please.

Telnet Command: vdsl optn

Syntax:
vdsl optn FUNC [us/ds/bi [value/on/off]]

Syntax Description
Parameter Description
FUNC
us/ds/bi
value
on/off
Example
Available settings contain: 'bitswap',
'sra',
'aelem',
'g.vector',
'status',
'trellis',
'retx',
'default'.
us: upstream
ds: downstream
bi: bidirection.
'aelem' and 'g.vector' can be only on/off.
The value shall be hex digits. bitswap=0~2,
sra=0,2,3,4.
Type “on” for enabling such function. Type “off” for disabling such function.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami