DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Data Flow Monitor
- willcurtis
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 10
- Thank you received: 0
06 Mar 2017 15:57 #88459
by willcurtis
Data Flow Monitor was created by willcurtis
Hi Guys,
Can anyone confirm that the Data Flow Monitor option on the 2860 will only report traffic on non-IP Routed Subnets? i.e. only subnets subject to NAT will show traffic information?
Kind Regards, Will.
Can anyone confirm that the Data Flow Monitor option on the 2860 will only report traffic on non-IP Routed Subnets? i.e. only subnets subject to NAT will show traffic information?
Kind Regards, Will.
Please Log in or Create an account to join the conversation.
- dannymakie
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
06 Apr 2017 10:26 #88648
by dannymakie
Replied by dannymakie on topic Re: Data Flow Monitor
It works for us up until firmware version 3.8.2 on the draytek 2860. 3.8.4.3_BT seems to break Data Flow in routing mode.
Try using the VLAN option for example LAN2 and put port 2 to 6 in LAN2 and enable LAN 2 for routed mode. Leave LAN 1 and Port1 in NAT. see if it shows up then as i dont think the default routed mode works
Try using the VLAN option for example LAN2 and put port 2 to 6 in LAN2 and enable LAN 2 for routed mode. Leave LAN 1 and Port1 in NAT. see if it shows up then as i dont think the default routed mode works
Please Log in or Create an account to join the conversation.
- fryr
- Offline
- Junior Member
Less
More
- Posts: 24
- Thank you received: 0
07 Apr 2017 11:14 #88653
by fryr
Replied by fryr on topic Re: Data Flow Monitor
It seems broken for me even in basic non IP routed mode on v 3.8.4.4 - it shows sessions but not throughput for each connection.
Please Log in or Create an account to join the conversation.
- dannymakie
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
13 Apr 2017 10:31 #88694
by dannymakie
Replied by dannymakie on topic Re: Data Flow Monitor
just got hold of 3.8.5_rc6a_bt, this now support IKEv2 so i will be testing VPNs, i'll see if DataFlow Monitor is fixed.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek