DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 rebooting in the wind
- mbames
- Topic Author
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
23 Feb 2017 16:24 #88356
by mbames
2820 rebooting in the wind was created by mbames
Has anyone else experienced this? Parents live at the end of a long and slightly troublesome line. Since some recent BTor work in the area their SNR has jumped up somewhat (used to be stable at 11).
While monitoring this I noticed the router had rebooted (it is powered by a UPS), so a powercut wasn't the cause. The SNR is jumping about between 13 - 18db, has anyone else experienced reboots due to dodgy lines?
I popped on the latest firmware last weekend (long line version - 211801_A).
Thanks,
Matt
While monitoring this I noticed the router had rebooted (it is powered by a UPS), so a powercut wasn't the cause. The SNR is jumping about between 13 - 18db, has anyone else experienced reboots due to dodgy lines?
I popped on the latest firmware last weekend (long line version - 211801_A).
Thanks,
Matt
Please Log in or Create an account to join the conversation.
- mbames
- Topic Author
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
15 Mar 2017 22:19 #88527
by mbames
Replied by mbames on topic Re: 2820 rebooting in the wind
bump.
Router has rebooted a few more times since this initial post. It is running the latest [longline] firmware, and powered by a UPS, so unless the PSU has become unstable I am a bit stuck for ideas. I am debating powering up a 120 modem and using that via WAN2 for a bit to see what happens (harder for me to see if the 120 reboots, apart from the reduced uptime on wan2).
Line is at my parents, so I don't often get back there to tinker.
Router has rebooted a few more times since this initial post. It is running the latest [longline] firmware, and powered by a UPS, so unless the PSU has become unstable I am a bit stuck for ideas. I am debating powering up a 120 modem and using that via WAN2 for a bit to see what happens (harder for me to see if the 120 reboots, apart from the reduced uptime on wan2).
Line is at my parents, so I don't often get back there to tinker.
Please Log in or Create an account to join the conversation.
- mbames
- Topic Author
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
17 Mar 2017 10:43 #88535
by mbames
Replied by mbames on topic Re: 2820 rebooting in the wind
Current line stats are reporting as:
Code:
> adsl status
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 1536000 bps US Actual Rate : 448000 bps
DS Attainable Rate : 1920000 bps US Attainable Rate : 704000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 4 US Interleave Depth : 2
NE Current Attenuation : 63 dB Cur SNR Margin : 9 dB
DS actual PSD : 17. 9 dB US actual PSD : 11. 9 dB
ADSL Firmware Version : 211801_A
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 31 dB Far SNR Margin : 11 dB
CO ITU Version[0] : 0000414c CO ITU Version[1] : 00004342
DSLAM CHIPSET VENDOR : < ALA >
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek