DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

No option to specify WAN1 IP alias on Routing screen

  • oliverm2
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Nov 2016 15:14 #87407 by oliverm2
Hi

I'm trying to use these instructions to set up an address mapping but I'm not seeing our additional WAN IP aliases being shown (which is a pain as it's those IPs I wanted to specify).

http://www.draytek.co.uk/support/guides/kb-policy-routing-guide#4-address-mapping

I've added the IPs to the Wan port under the aliases box. We have two usable; the primary is ticked to be in the NAT pool and the secondary is beneath it but isn't in the nat pool.

Any ideas why I can't see them in the routing screen? Here's a link to a screenshot. There should be, according to the docs, the option under WAN1 to specify the WAN IP to use for the address mapping, but there isn't.

https://goo.gl/XcpaUX

Olly

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami