DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

910c firmware upgrade fail

  • it344x
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Nov 2016 21:27 #87391 by it344x
910c firmware upgrade fail was created by it344x
hi Everyone,
I have just updated my firmware from 1.1.5.1 to 1.1.7.1, and the update failed. I stupidly did not write down the fail message, but it did say along the lines that the update had corrupted the existing firmware.

The AP flashes orange for a while, then lights up light blue for a second, then dark blue for a second, then goes back to flashing orange.
Can anyone help me with the process to get a valid firmware back on please?
I am presuming it will be similar to the tftp process for routers, but I am not sure.

Any help/advice would be most appreciated.

thanks
Martin

*edit* problem fixed - it is the tftp process, but the default IP address ( 192.168.1.2 ) was already taken, hence not being able to see the sick 910c on the network. All fixed, all happy. :D :D :mrgreen:

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami