DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Is it possible to do time limited user internet on 2760 ?
- ian_m
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
20 Jul 2016 12:04 #86493
by ian_m
Is it possible to do time limited user internet on 2760 ? was created by ian_m
Is it possible to do time limited user internet access on 2760 ?
ie a user/IP address/MAC address is limited to say only 2 hours a day ?
ie a user/IP address/MAC address is limited to say only 2 hours a day ?
Please Log in or Create an account to join the conversation.
- admin3
- Offline
- Site Admin
Less
More
- Posts: 604
- Thank you received: 0
20 Jul 2016 14:28 #86494
by admin3
Forum Administrator
Replied by admin3 on topic Re: Is it possible to do time limited user internet on 2760
Yes it can, with current firmware, the Wireless LAN interface has an option for [Station Control] which does exactly that. Please be aware that it can only apply to the wireless LAN of the router, not wired connections, though the current VigorAP products can also do this, which negates the issue as long as your clients are all wireless.
It's not as advanced as User Management present on the Vigor 2860 and other models, so it may be worth considering one of those if you require more control over client connections or provide this control for wired LAN access.
It's not as advanced as User Management present on the Vigor 2860 and other models, so it may be worth considering one of those if you require more control over client connections or provide this control for wired LAN access.
Forum Administrator
Please Log in or Create an account to join the conversation.
- ian_m
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
20 Jul 2016 15:34 #86495
by ian_m
Replied by ian_m on topic Re: Is it possible to do time limited user internet on 2760
I had seen this in the wireless settings.
Unfortunately the users also connect via wireless access points so the time quota rule would have to be in the firewall.
Might have to consider the 2860 then.
Unfortunately the users also connect via wireless access points so the time quota rule would have to be in the firewall.
Might have to consider the 2860 then.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek