DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2850n (Sky Fiber)

  • galmax77
  • Topic Author
  • Offline
  • New Member
  • New Member
More
07 Jun 2016 18:13 #86280 by galmax77
Draytek 2850n (Sky Fiber) was created by galmax77
So I got some help with setting up my old 2820n (thx guys) but I decided to upgrade an found a 2850n vdsl which I have now brought an connected to my sky fiber using the setup guide found on the Draytek homepage.

My problem is when I first set it up the vdsl download speed was only 17000kbps but my sky-hub gives me 20000mbs to 25000kbps but now its down to 16500kbps on the 2850n
If I connect the sky-Hub it connects back at 20 to 25 an 5 upload.. the upload on both routers is fine as the 2850 gets just under 5000kbps upload.

Any ideas or best firmware modem versions to use I have tried a couple but nothing has changed.

As I said before I have used the Draytek Homepage setup guide.

VDSL Information (VDSL Firmware Version: 1414c3 )
Profile State UP Speed Down Speed SNR Upstream SNR Downstream
17a Showtime 4859 (Kbps) 16489 (Kbps) 70 (0.1dB) 105 (0.1dB)
Server Information (Broadcom v10.09.12 )

Please Log in or Create an account to join the conversation.

  • galmax77
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Jul 2016 21:05 #86457 by galmax77
Replied by galmax77 on topic Re: Draytek 2850n (Sky Fiber)
Why isn't anyone replying xD

I tried to use telnet to tweak the SNR but it dont have a vdsl status command :S whats going on this router is turning out to be totally s..t
I'm now down to 14994 ( Attainable Rate 5105//21453 Kbps )

http://grabilla.com/0670a-e64edf3c-3d1f-42ee-8fe5-363fbd1f2d6f.html

Please Log in or Create an account to join the conversation.

More
11 Jul 2016 11:41 #86460 by andew
Replied by andew on topic Re: Draytek 2850n (Sky Fiber)
Hi

I found my 2850 to be really unstable when connected directly to my line. Speed were unstable, and kept going down and down. I found the router better if i connected it via my btopenreach modem. The 2850 also doesn't support vectoring and G.INP. You may want to take advantage of the following offer: http://www.draytek.co.uk/upgrade . I now have my 2860 connected directly and its working absolutely fine.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami