DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2860 and AP 900 to create a guest network

More
20 Apr 2016 08:36 #85955 by aweaton
Replied by aweaton on topic Re: Vigor 2860 and AP 900 to create a guest network

mrwrighty wrote: I have followed the best I can, but the Guest Wifi is not picking up a DHCP address from the VLAN configured on the Vigor2860


Does the PoE switch support 802.11Q VLAN tagging? If not your VLAN tags will probably not work. As suggested elsewhere, it is probably worth testing with the APs directly connected to the 2860.
https://en.wikipedia.org/wiki/IEEE_802.1Q

Please Log in or Create an account to join the conversation.

  • mrwrighty
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 Apr 2016 10:39 #85963 by mrwrighty
Replied by mrwrighty on topic Re: Vigor 2860 and AP 900 to create a guest network

dazeck wrote:

mrwrighty wrote: Yes I have looked at that link, but it is not specific to 2860 as it shows LAN and SSID settings which the 2860 does not have.

The AP900 are connected to the network via POE through a single port. The 2860 has a single connection on port 1 to the office LAN.



Did you tick the enable VLAN option to get the extra settings for LAN/SSID.

I will be doing the exact same setup as you this weekend, but using a 2860 and 3 x AP-810. I already have a 2860 and AP-900 at home so have been through the guide and I see all the options if I follow it.



Thats great, let me know how you get on.

I still cannot get the Guest network to pick up an IP address from the VLAN on the 2860

Please Log in or Create an account to join the conversation.

Moderators: Chris