DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Routing to ADSL and WAN2 ports?
- aneng
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank yous received: 0
22 Mar 2016 19:58 #85707
by aneng
Routing to ADSL and WAN2 ports? was created by aneng
Could someone answer a simple question for me please? I'm more used to Cisco's IOS than the Draytek GUI, and I'm having trouble understanding how you choose which of the WAN ports handles the routed traffic from the various LANs.
I'm presuming you can't route traffic to two different WAN networks (I.e. one on the DSL port, and a different one on WAN2), so, how does it work ?
Ta!
I'm presuming you can't route traffic to two different WAN networks (I.e. one on the DSL port, and a different one on WAN2), so, how does it work ?
Ta!
Please Log in or Create an account to join the conversation.
- fchef
- Offline
- Banned
Less
More
- Posts: 65
- Thank yous received: 0
27 Mar 2016 17:48 #85732
by fchef
Replied by fchef on topic Re: Routing to ADSL and WAN2 ports?
Load-Balance/Route Policy-->Source IP Range (or subnet)-->Destination ANY-->Send via Interface Wan1 or wan2 or whatever..
It's that simple
It's that simple
Please Log in or Create an account to join the conversation.
- aneng
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank yous received: 0
28 Mar 2016 17:17 #85739
by aneng
Replied by aneng on topic Re: Routing to ADSL and WAN2 ports?
Wow... that's easy ! Thanks for that.
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek