DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2925 WAN Profile & AP-900 Failure
- lozcs
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank yous received: 0
02 Jan 2016 10:22 #85009
by lozcs
2925 WAN Profile & AP-900 Failure was created by lozcs
Is there a limit to blocked MAC addresses that can be applied to a WAN profile?
It appears when I add around 60 MAC addresses to the ACL it then fails to apply the default profile
Auto provision and manually applying profile to access point fail with the same error
Event log says
"APM AutoProvision failed re-discover"
It appears when I add around 60 MAC addresses to the ACL it then fails to apply the default profile
Auto provision and manually applying profile to access point fail with the same error
Event log says
"APM AutoProvision failed re-discover"
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
Less
More
- Posts: 1199
- Thank yous received: 9
02 Jan 2016 17:31 #85014
by piste basher
Replied by piste basher on topic Re: 2925 WAN Profile & AP-900 Failure
In the 2860 setup pages it says that there is a limit of 64 entries.
Please Log in or Create an account to join the conversation.
- lozcs
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank yous received: 0
03 Jan 2016 21:33 #85028
by lozcs
Replied by lozcs on topic Re: 2925 WAN Profile & AP-900 Failure
thanks, anyone tell me is that the same for the 2925?
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek