DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

WAN2 and Port Forwarding not working

  • draytekseriesuser
  • Topic Author
  • Offline
  • Banned
  • Banned
More
23 Oct 2015 10:20 #84596 by draytekseriesuser
WAN2 and Port Forwarding not working was created by draytekseriesuser
Hi,

I have port forwarding configured on the Vigor 2860 to forward some ports to a PC on my local LAN at 192.168.0.4 setup for all WAN interfaces.
When I am coming in from outside over the ADSL WAN1 interface or WAN3 USB, it is working fine.
When I am coming in from outside on the WAN2 interface, it is not working.

WAN2 setup:
Static IP setup. Internet connection coming in from Mikrotik with IP 192.168.0.254.
IP Address for WAN2 set to be 192.168.0.250 on the Vigor 2860.
subnet mask: 255.255.255.0

The Mikrotik is setup to do port forwarding of the ports to IP 192.168.0.250 (Which should be the WAN2 IP).

But, the port forwarding is not working. From the mikrotik I can for instance not telnet to the port (that is setup for forwarding on the vigor) on IP 192.168.0.250 (WAN2).

Is there something I must change to allow the port forwarding from the mikroTik to the Vigor WAN2 to work?

Thanks

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami