DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2925n+ drops connection constantly
- mr_pablo
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank yous received: 0
14 Oct 2015 13:46 #84536
by mr_pablo
Vigor 2925n+ drops connection constantly was created by mr_pablo
So for the past few days (since Monday it seems) our Vigor 2925n+ has been dropping connectivity to the Internet (and in fact to the router itself I believe)
I have been capturing logs to a USB stick plugged into the router (amazing feature!) and have spotted some odd things happening.
Whenever a drop out seems to happen, the logs go from todays date, Oct 14, to Jan 1, then after 7 seconds, back to Oct 14.
I have put a log file from earlier in my DropBox,
https://www.dropbox.com/s/rujccv6uq15aerm/004_2015-10-14_11-34-23.log?dl=0
Can anyone see anything that might be of concern?
Our network is setup as follows:
I power cycled everything, it didn't seem to help.
NB - I contacted my ISP, they said they couldn't see any issues on their end.
I have been capturing logs to a USB stick plugged into the router (amazing feature!) and have spotted some odd things happening.
Whenever a drop out seems to happen, the logs go from todays date, Oct 14, to Jan 1, then after 7 seconds, back to Oct 14.
I have put a log file from earlier in my DropBox,
Can anyone see anything that might be of concern?
Our network is setup as follows:
I power cycled everything, it didn't seem to help.
NB - I contacted my ISP, they said they couldn't see any issues on their end.
Please Log in or Create an account to join the conversation.
- mbames
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
16 Oct 2015 11:13 #84551
by mbames
Replied by mbames on topic Re: Vigor 2925n+ drops connection constantly
I'd imagine that if the time resets that is because the 2925 has rebooted, and 7 seconds later it has reconnected and performed a time sync.
What firmware is running, I found 3.8.1 with wifi enabled to be quite unstable, but the latest 3.8.2 RC4 is much better.
What firmware is running, I found 3.8.1 with wifi enabled to be quite unstable, but the latest 3.8.2 RC4 is much better.
Please Log in or Create an account to join the conversation.
- mr_pablo
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank yous received: 0
16 Oct 2015 11:17 #84552
by mr_pablo
Replied by mr_pablo on topic Re: Vigor 2925n+ drops connection constantly
Where did you find the firmware? The download section only has the latest, 3.0.8.1
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank yous received: 0
17 Oct 2015 13:45 #84559
by admin
I'd agree.
Forum Administrator
Replied by admin on topic Re: Vigor 2925n+ drops connection constantly
I'd imagine that if the time resets that is because the 2925 has rebooted, and 7 seconds later it has reconnected and performed a time sync.mbames wrote:
I'd agree.
Forum Administrator
Please Log in or Create an account to join the conversation.
- mbames
- Offline
- Member
Less
More
- Posts: 326
- Thank yous received: 0
20 Oct 2015 16:05 #84578
by mbames
UK Support sent me a link.... They were going to say when it had been made into a formal release, but I am guessing that hasn't happened yet, as the official page is still offering up 3.0.8.1. My 2925 was rubbish with 3.0.8.1 and wifi enabled, but since I popped this RC4 firmware on it has been rock solid.
System Up Time 769:8:3 hours
But seemingly my HG612 has dropped its WAN1 connection about 40 hours ago.
---
Dear Matthew,
Thank you for your email.
There is a new firmware available at
http://www.draytek.co.uk/download/support/files/v2925_382RC4_r50794.zip
Replied by mbames on topic Re: Vigor 2925n+ drops connection constantly
Where did you find the firmware? The download section only has the latest, 3.0.8.1mr_pablo wrote:
UK Support sent me a link.... They were going to say when it had been made into a formal release, but I am guessing that hasn't happened yet, as the official page is still offering up 3.0.8.1. My 2925 was rubbish with 3.0.8.1 and wifi enabled, but since I popped this RC4 firmware on it has been rock solid.
System Up Time 769:8:3 hours
But seemingly my HG612 has dropped its WAN1 connection about 40 hours ago.
---
Dear Matthew,
Thank you for your email.
There is a new firmware available at
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek