DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2860 - IP cameras not working with new firmware

  • anparkinson
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Oct 2015 17:49 #84515 by anparkinson
I updated my 2860 to firmware 3.8.1_VT2 today.
Now I cannot access my three IP cameras through my fixed IP address.
Before I would access through IP address 80.2**.10.2**:100 (and 101 and 102) and connected fine.
Now there's no connection. They still work fine if I connect through the local IP address so it's not a camera issue.
My satellite receiver can still be accessed through the fixed IP address (port 90) but not the cameras.
This started after the firmware upgrade.
Any ideas?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami