DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 multiple WAN IP addresses

  • rvsjimbo
  • Topic Author
  • Offline
  • New Member
  • New Member
More
10 Sep 2015 17:35 #84327 by rvsjimbo
2820 multiple WAN IP addresses was created by rvsjimbo
Hi,

I am having problems getting the Vigor 2820 to deal with multiple WAN IP addresses. I know it can do it, because it did it with a previous ISP. Its almost doing it, as it is serving out the correct IP addresses to the correct systems, but it does not seem to be routing packets to the outside world.

Here's what I have done so far:

1) Under WAN/Internet Access/WAN1 I have set the IP address for the router to the correct IP address, and also listed all of my available addresses in the "IP Address From ISP" area.

2) Under LAN/General Setup I have setup the IP routing and 2nd subnet DHCP server.

3) Under LAN/Bind IP to MAC I have made it give certain IP addresses to certain MAC addresses - I do not have Strict Bind checked, should I?

I believe thats all that needs to be done, but its just not working. Hopefully someone else is doing the same thing :-)

Cheers!

Paul.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami