DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2850vn setup for use with BT Youview with ADSL

  • vandenm
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Jun 2015 23:30 #83608 by vandenm
Hi

I'm trying to setup my Vigor 2850vn setup to use with my BT Youview with ADSL.

I have done the following but still no joy, any help would be much appreciated.

Cheers Mike V.

>> Go to WAN / Multi-PVCs and under the General Tab enable Channel 3, VPI=0, VCI=65 UBR MPoA and "1483 Bridged IP LLC"
>> Now click on the "Port-based Bridge" Tab and Enable Channel 3 , and enable P2,P3 & P4, and select service type "IGMP"
>> Now click on and reboot the Router "With the current configuration"
>> When rebooted go to Application / IGMP and enable IGMP Proxy for WAN1 and also enable IGMP Snooping
>> Now click on
>> it only works on physical ports 2, 3 & 4.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami