DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2960 seems to throttle outgoing? - <Fixed>

  • jbalshaw
  • Topic Author
  • Offline
  • New Member
  • New Member
More
24 May 2015 21:07 #83478 by jbalshaw
We've just got a 100Mbps leased line, so have had to upgrade from old 2920 to a 2960 as the 2920 just can't handle the speed, topping out at around 40Mbps down

I've been using Vigor's since the early very routers which you'd plug a USB modem into, so was pretty comfortable with the Draytek UI. The 2960 of course abandons all of this, so I'm struggling with the new UI and a lot of things I'm just not "up to speed with" yet (forgive the pun).

The 2960 is connected to a Cisco 1921 and gets great download speeds of (near as damn it) 100Mbps, upload on the other hand seems to be just over 20Mbps, but if I run the test on a couple of machines, both machines manage an upload of around 20Mbps, so I'm wonder if I might have inadvertently turned on some kind of load balancing?

Any clues/pointers would be welcome from this 'newbie' - Thanks :-)

<later>

Testing on another laptop gives full 100MBps up/down, so the problem's obviously not with my router :-)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami