DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860n port forwarding
- kx2
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
11 May 2015 08:10 #83397
by kx2
2860n port forwarding was created by kx2
Every so often port forwarding stops working and the only solution is to reboot the router. I can't even access the login page at port 8081 but can see my server on port 80. Everything works perfectly when I reboot.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
14 May 2015 16:37 #83413
by admin
Forum Administrator
Replied by admin on topic Re: 2860n port forwarding
Not sure on the problem, but you can set a scheduled reboot as a temporary fix.
Forum Administrator
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
14 May 2015 19:18 #83414
by babis3g
Replied by babis3g on topic Re: 2860n port forwarding
when updated firmware did you used the *rst* file extention & all setting back from the begin or just updated with the *all* & with current settings?
Also is the latest firmware or older?
Also is the latest firmware or older?
Please Log in or Create an account to join the conversation.
- kx2
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
14 May 2015 20:01 #83415
by kx2
Replied by kx2 on topic Re: 2860n port forwarding
Don't know what version I used but I have the latest version. I have set up the syslog to see what is happening and of course it has run perfectly for the last 37 hours.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek