DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860n+ DMZ & Port forwarding
- gilesy
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
08 May 2015 09:56 #83373
by gilesy
2860n+ DMZ & Port forwarding was created by gilesy
Hi guys,
I have a few 2860n+ routers deployed in behind client's routers (sky, BT etc.) with DMZ set up and the DrayTek stuff doing the leg work.
the problem I have is the latest install, where the client has monitored CCTV, and the guys have asked for some specific ports to be forwarded. I have opened the appropriate ports/ranges under the NAT menu, and set up a firewall filter set using the same details. The probelm is there is no response from the router when the monitering firm try and get in.
Also, when I try and ping the site, I get no response.
What am I missing? And i expect a good kicking if it's obvious!
Cheers,
Gilesy
I have a few 2860n+ routers deployed in behind client's routers (sky, BT etc.) with DMZ set up and the DrayTek stuff doing the leg work.
the problem I have is the latest install, where the client has monitored CCTV, and the guys have asked for some specific ports to be forwarded. I have opened the appropriate ports/ranges under the NAT menu, and set up a firewall filter set using the same details. The probelm is there is no response from the router when the monitering firm try and get in.
Also, when I try and ping the site, I get no response.
What am I missing? And i expect a good kicking if it's obvious!
Cheers,
Gilesy
Please Log in or Create an account to join the conversation.
- adriandaz
- Offline
- Junior Member
Less
More
- Posts: 89
- Thank you received: 0
09 May 2015 16:06 #83382
by adriandaz
Replied by adriandaz on topic Re: 2860n+ DMZ & Port forwarding
Are you using the WAN2 interface for these rules?
Please Log in or Create an account to join the conversation.
- gilesy
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
11 May 2015 09:02 #83398
by gilesy
Replied by gilesy on topic Re: 2860n+ DMZ & Port forwarding
I am, yes. The 2860 is connected to the Sky router via WAN2, all local devices are then connected through a switch the LAN1
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek