DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2710N Firmware Upgrade
- fcs-simon
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 24
- Thank you received: 0
07 May 2015 12:06 #83370
by fcs-simon
2710N Firmware Upgrade was created by fcs-simon
Good morning all
I have just upgraded my 2710N to the latest firmware (3.6.8) but now it is in a constant reboot loop. I get the ACT and WLAN lights lit but then the device just reboots over and over again.
Any thoughts would be much appreciated.
Many thanks
Simon
I have just upgraded my 2710N to the latest firmware (3.6.
Any thoughts would be much appreciated.
Many thanks
Simon
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
07 May 2015 19:11 #83372
by babis3g
Replied by babis3g on topic Re: 2710N Firmware Upgrade
the ATC led is steady or flashing each second? or not have change to flash?
In normal operation the ATC should flash each second
You can try to reflash via the firmware utility tool but needs window based pc & use of the *rst* file extension & of course the correct files for your model
http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=19253&p=80423&hilit=firmware+utility+tool#p79577
In normal operation the ATC should flash each second
You can try to reflash via the firmware utility tool but needs window based pc & use of the *rst* file extension & of course the correct files for your model
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek