DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2760n firmware 3.7.8.1 "Maximum sessions" warning
- hernibles
- Topic Author
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
10 May 2015 20:35 #83392
by hernibles
Replied by hernibles on topic Re: 2760n firmware 3.7.8.1 "Maximum sessions" warning
April 29th. It is on UK download page under 2760. "G.INP /Vectoring beta firmware"
I have also tried 574307: - Modem code 574307 has vectoring (G.993.5) enabled for test purposes.
Vectoring and G.INP are provided for test purposes only and are not part of the official
specification currently. If your line does not support either then the modem code
will still operate.
No speed increase discernible though I am 650m from cabinet (Huawei installed about 6 months ago).
I have also tried 574307: - Modem code 574307 has vectoring (G.993.5) enabled for test purposes.
Vectoring and G.INP are provided for test purposes only and are not part of the official
specification currently. If your line does not support either then the modem code
will still operate.
No speed increase discernible though I am 650m from cabinet (Huawei installed about 6 months ago).
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
10 May 2015 20:55 #83393
by babis3g
Replied by babis3g on topic Re: 2760n firmware 3.7.8.1 "Maximum sessions" warning
Many thanks i guess must be fixed and the session issue as well then
However i am only with adsl, but as always i may give it a go
I am sure it will Not harm my adsl line the vectoring g. inp firmware
However i am only with adsl, but as always i may give it a go
I am sure it will Not harm my adsl line the vectoring g. inp firmware
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek