DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2860vn plus CRC tolerance
- it344x
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank yous received: 0
29 Mar 2015 12:28 #83043
by it344x
2860vn plus CRC tolerance was created by it344x
Hello All,
I have recently replaced my 2820 with a 2860vn+ router, and found that it is constantly resetting its connection to my ISP, but always shows zero CRC errors. When I plug the 2820 back in, it registers CRC errors and reboots far less frequently.
Assuming that the lack of CRC tolerance is causing my 2860vn to drop & restart the link all the time, is there a way to alter this?
I am aware that the ( BT ) line is not brilliant, I am using ADSL at this point ( although I will probably upgrade to VDSL as Vodafone are dropping Demon:evil: but I would like to know how to stop my 2860 from constantly resetting.
Any help or advice would be most appreciated.
regards
Martin
I have recently replaced my 2820 with a 2860vn+ router, and found that it is constantly resetting its connection to my ISP, but always shows zero CRC errors. When I plug the 2820 back in, it registers CRC errors and reboots far less frequently.
Assuming that the lack of CRC tolerance is causing my 2860vn to drop & restart the link all the time, is there a way to alter this?
I am aware that the ( BT ) line is not brilliant, I am using ADSL at this point ( although I will probably upgrade to VDSL as Vodafone are dropping Demon
Any help or advice would be most appreciated.
regards
Martin
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank yous received: 0
29 Mar 2015 17:47 #83045
by babis3g
Replied by babis3g on topic Re: 2860vn plus CRC tolerance
Have you updated to latest firmware? (3.7.8 ) using the *RST* file extension ... i remember older firmwares had issue with upnp
Other option to try an other adsl filter or change from PPPoA to PPPoE settings
Other option to try an other adsl filter or change from PPPoA to PPPoE settings
Please Log in or Create an account to join the conversation.
- it344x
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 15
- Thank yous received: 0
29 Mar 2015 19:14 #83046
by it344x
Replied by it344x on topic Re: 2860vn plus CRC tolerance
thanks - I forgot to mention that yes, I am on the latest firmware too.
Please Log in or Create an account to join the conversation.
- adriandaz
- Offline
- Junior Member
Less
More
- Posts: 89
- Thank yous received: 0
30 Mar 2015 10:45 #83047
by adriandaz
Replied by adriandaz on topic Re: 2860vn plus CRC tolerance
I had the same problem on standard firmware with either modem codes, so switched to vector firmware and errors were reported and the connection was more stable.
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek