DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Moving 2830n from ADSL to Fibre

  • grantm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Mar 2015 16:40 #83006 by grantm
Moving 2830n from ADSL to Fibre was created by grantm
My 2830n is currently used on an ADSL line, we're upgrading to fibre next month.

Can I just connect the BTO modem output to WAN 2 and carry on as before or will some reconfig of the 2830n be required?

Thanks.

Please Log in or Create an account to join the conversation.

More
23 Mar 2015 16:43 #83007 by sicon
Replied by sicon on topic Re: Moving 2830n from ADSL to Fibre
normally you would configure the pppoe profile on WAN2

Please Log in or Create an account to join the conversation.

  • grantm
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
02 Apr 2015 14:35 #83057 by grantm
Replied by grantm on topic Re: Moving 2830n from ADSL to Fibre
Thanks, was a very simple process. Now need to work out why the wifi is maxing out at 33Mb/s vs 76Mb/s for wired.

Please Log in or Create an account to join the conversation.

More
07 Apr 2015 16:22 #83085 by sicon
Replied by sicon on topic Re: Moving 2830n from ADSL to Fibre

grantm wrote: Thanks, was a very simple process. Now need to work out why the wifi is maxing out at 33Mb/s vs 76Mb/s for wired.



what mode are you running in?
Change to N only and run a speed test then (on a supported device)
Lots of factors effect Wifi though

Please Log in or Create an account to join the conversation.

Moderators: Chris