DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2830, WAN2 and Fibre Modem

More
25 Feb 2015 08:17 #82759 by hailv
2830, WAN2 and Fibre Modem was created by hailv
My line was down this morning, and multiple reboots of router and modem didn't work. Line tested fine from outside, and all openreach modem lights were green and solid. I noticed the NIC lights were green at both ends of the connection to WAN2 <> Modem, BUT the WAN2 light was OFF on the 2830.

Solution : In the router config, I disabled the WAN2 port, reboot, Enabled WAN2 port, reboot. Light came on, and it solved the problem. First time that's happened though.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami