DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2760VN disabled lan and enable lan shouldn't be in same subn

  • fcs-simon
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Feb 2015 14:46 #82586 by fcs-simon
2760VN disabled lan and enable lan shouldn't be in same subn was created by fcs-simon
Good afternoon
We are trying to configure a 2760VN on the 192.168.0.0 range but keep getting this error
"disabled lan and enable lan shouldn't be in same subnet"
Can anybody shed any light please?
Many thanks
Simon

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 15:48 #82588 by sicon
Replied by sicon on topic Re: 2760VN disabled lan and enable lan shouldn't be in same
you need to enable the VLAN and change the interface that is already using the 192.168.0.0 range to something else

Please Log in or Create an account to join the conversation.

  • fcs-simon
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Feb 2015 16:26 #82590 by fcs-simon
Replied by fcs-simon on topic Re: 2760VN disabled lan and enable lan shouldn't be in same
That's what we thought but after enabling VLAN0 I can't see where to go to change the existing interface...
We are running the latest firmware in case you are wondering.
Thanks
Simon

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 16:48 #82593 by babis3g
Replied by babis3g on topic Re: 2760VN disabled lan and enable lan shouldn't be in same
i think is at LAN >> General Setup (delight series)

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 17:00 #82594 by fcsengineer
Replied by fcsengineer on topic Re: 2760VN disabled lan and enable lan shouldn't be in same
Yeah we have been looking under "LAN"-"General Setup" but only have LAN1: 192.168.1.1 and LAN2:192.168.2.1
Nothing we can see has 192.168.0.x already configured
Any thoughts?

Thanks

Please Log in or Create an account to join the conversation.

More
05 Feb 2015 17:01 #82595 by voodle
Replied by voodle on topic Re: 2760VN disabled lan and enable lan shouldn't be in same
Try the 3.7.8 firmware, it might help: ftp://ftp.draytek.com/Vigor2760_Delight/Firmware/v3.7.8/

Please Log in or Create an account to join the conversation.

Moderators: Chris