DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 2830vnp and Hauwei B593s-22
- techi
- Topic Author
- Offline
- Banned
Less
More
- Posts: 1
- Thank you received: 0
05 Nov 2014 19:59 #81666
by techi
Draytek 2830vnp and Hauwei B593s-22 was created by techi
Hi Guys ,
I'm trying to setup the huawei b593 as wan 2 for load balancing can anyone give me some pointers.
Cheers
Martin
I'm trying to setup the huawei b593 as wan 2 for load balancing can anyone give me some pointers.
Cheers
Martin
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
05 Nov 2014 22:38 #81669
by babis3g
Replied by babis3g on topic Re: Draytek 2830vnp and Hauwei B593s-22
never tried with a 4G modem but you need to set it at any kind of bridge mode or modem only if is possible
before that, set Wan>general set up >wan 2 enable, always on, not sure if needs other settings such vlan etc but it should not
wan > internet access > details page PPPoE tab, if needs password /username - static ip add accordingly & connection detection always on
Then cable from the Lan port (perhaps Lan 1) of the b593 to the wan 2 of the 2830
If there is not any kind of bridge or modem only mode then you may need change the ip address of the modem or the draytek & set the draytek with static or dynamic ip
here i have an example only changing the settings of the first modem
(option 2)
http://www.forum.draytek.co.uk/viewtopic.php?f=2&t=19712#p81508
once both wans are working here for load balance
http://www.draytek.com/index.php?option=com_k2&view=item&id=5181:policy-route&Itemid=293&lang=en
http://www.draytek.com/index.php?option=com_k2&view=item&id=1810:faq-article-1810&Itemid=293&lang=en
http://www.abptech.com/blog/draytek-2920n-automatic-load-balancing-configuration
https://www.draytek.co.uk/archive/kb/kb_load_balancing.html
before that, set Wan>general set up >wan 2 enable, always on, not sure if needs other settings such vlan etc but it should not
wan > internet access > details page PPPoE tab, if needs password /username - static ip add accordingly & connection detection always on
Then cable from the Lan port (perhaps Lan 1) of the b593 to the wan 2 of the 2830
If there is not any kind of bridge or modem only mode then you may need change the ip address of the modem or the draytek & set the draytek with static or dynamic ip
here i have an example only changing the settings of the first modem
(option 2)
once both wans are working here for load balance
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek