DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Smart Monitor Services Stuck on Starting
- lightpathit
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 23
- Thank you received: 0
30 Jul 2014 10:01 #80821
by lightpathit
Smart Monitor Services Stuck on Starting was created by lightpathit
We are trying to get Smart Monitor installed on a Windows 2008 R2 server. The setup process all went OK and we chose to run it on port 8080 so it did not conflict with IIS. When we go to the website we get an "It Works" message, but are unable to get the software to work. After looking in Services, the SMwatch service is running, but the Smartflow and Smartwatch services are just stuck on Starting. In event viewer there are messages like "The Smartmonitor service terminated unexpectedly. It has done this 866 time(s)." or "The Smartflow service terminated unexpectedly. It has done this 7 time(s)." Both with EventID 7034. I've searched the forums and the internet for similar issues, but am unable to find anything. Any help would be greatly appreciated.
Thanks
Martin
Thanks
Martin
Please Log in or Create an account to join the conversation.
- pczaefr
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
23 Oct 2014 10:20 #81478
by pczaefr
Replied by pczaefr on topic Re: Smart Monitor Services Stuck on Starting
I have the same problem. Smartflow and Smartwatch services are just stuck on Starting. Using windows 7.
I can log in to smart monitor webpage but its capturing only itself.
any idea anyone?
I can log in to smart monitor webpage but its capturing only itself.
any idea anyone?
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
23 Oct 2014 18:40 #81486
by babis3g
Replied by babis3g on topic Re: Smart Monitor Services Stuck on Starting
If helps latest firmware is 2.4.3
Please Log in or Create an account to join the conversation.
- b@dboy
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
02 Nov 2014 15:29 #81612
by b@dboy
Replied by b@dboy on topic Re: Smart Monitor Services Stuck on Starting
I have the same issue can't start it at all. Short message popup telling me: "StartServiceCtrlDispatcher being called. This may take several seconds. Please wait. " and nothing happened ...
Is anyone have idea what is wrong with it ?
Is anyone have idea what is wrong with it ?
Please Log in or Create an account to join the conversation.
- bman
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
05 May 2015 21:25 #83359
by bman
Replied by bman on topic Re: Smart Monitor Services Stuck on Starting
Yep... same problem for me -- come on Draytek support -- surely the fact that several people have posted this means that it is a systemic problem ... can someone from Draytek support please assist!
Please Log in or Create an account to join the conversation.
- babis3g
- Offline
- Dedicated Contributor
Less
More
- Posts: 1686
- Thank you received: 0
05 May 2015 21:53 #83360
by babis3g
Replied by babis3g on topic Re: Smart Monitor Services Stuck on Starting
Best to send emails, usually not coming in the forum for support
http://www.draytek.co.uk/support/techquery
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek