DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2860 Rebooting every couple of minutes
- leeovery
- Offline
- New Member
Less
More
- Posts: 2
- Thank yous received: 0
03 Apr 2014 22:06 #79552
by leeovery
Replied by leeovery on topic Re: Vigor 2860 Rebooting every couple of minutes
I can confirm that this does NOT fix the issue of the 2860n rebooting.
I have upgrades to this latest firmware but am still getting reboots.
I disabled upnp but I'm still getting them. Dlna is also disabled in plex.
I've sent 2 support requests to draytek now but have heard nothing back from them.
I'm really at a loss here. Just spend decent money on a router and it can't even perform the most basic of functionality; staying on for more than 30 mins at a time without rebooting itself?!?
I have upgrades to this latest firmware but am still getting reboots.
I disabled upnp but I'm still getting them. Dlna is also disabled in plex.
I've sent 2 support requests to draytek now but have heard nothing back from them.
I'm really at a loss here. Just spend decent money on a router and it can't even perform the most basic of functionality; staying on for more than 30 mins at a time without rebooting itself?!?
Please Log in or Create an account to join the conversation.
- cheops2006
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank yous received: 0
04 Apr 2014 09:17 #79553
by cheops2006
Replied by cheops2006 on topic Re: Vigor 2860 Rebooting every couple of minutes
I sent them a callstack of the crash so they could match it up with symbols from there code but UK support just ignored it.
I can't figure out if support are lazy , incompetent or just dont care .
I can't figure out if support are lazy
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank yous received: 0
04 Apr 2014 15:18 #79558
by voodle
You might have a different issue.
I had this at home and draytek have said the same thing - disabling UPnP allowed Plex to work on my network (which I installed for my chromecast ). I've asked draytek if there's a fix yet but it seems like they're still waiting on a fix
What I found was - this upnp reboot shows no reboot information when doing sys ver dbg . If it shows reboot info there then it's something different
Also I found that disabling Plex's GDM facility (allows auto discovery of plex servers on the network from plex client) helped the reboots stop. My computer(s) running utorrent with UPnP enabled also made it reboot more often.
cheops2006: could you post it in the thread and I can compare with what I got from my 2830?
Replied by voodle on topic Re: Vigor 2860 Rebooting every couple of minutes
I can confirm that this does NOT fix the issue of the 2860n rebooting.leeovery wrote:
I have upgrades to this latest firmware but am still getting reboots.
I disabled upnp but I'm still getting them. Dlna is also disabled in plex.
I've sent 2 support requests to draytek now but have heard nothing back from them.
I'm really at a loss here. Just spend decent money on a router and it can't even perform the most basic of functionality; staying on for more than 30 mins at a time without rebooting itself?!?
You might have a different issue.
I had this at home and draytek have said the same thing - disabling UPnP allowed Plex to work on my network (which I installed for my chromecast
What I found was - this upnp reboot shows no reboot information when doing sys ver dbg
Also I found that disabling Plex's GDM facility (allows auto discovery of plex servers on the network from plex client) helped the reboots stop. My computer(s) running utorrent with UPnP enabled also made it reboot more often.
cheops2006: could you post it in the thread and I can compare with what I got from my 2830?
Please Log in or Create an account to join the conversation.
- cheops2006
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank yous received: 0
05 Apr 2014 14:51 #79566
by cheops2006
Replied by cheops2006 on topic Re: Vigor 2860 Rebooting every couple of minutes
this is the crash I get, I had to revert to 3.7.3.3 because the new one just causes huge wireless problems of not being able to connect to game servers etc...just intermittent problems
Code:
EPC=8075fab8, Cause=90800034, Status=1100fc03, BadAddr=2e00654c, RetAddr=8075fa b8
exception id=13(TRAP)
exception occured in TASK Lavel
task_id=161, SP=0x818a3f44(12452 bytes free, 2908 used bytes)
system tick =4481
CURRENT_VERSION : 3.7.3.3_R
Dump CPU registers:
-----------------------------------------
$ 0: 00000000 fffffffe 00000000 00000000
$ 4: 818a3f8c 818a3f3a 818a3f39 818a3e1c
$ 8: 00000002 00000000 00000002 00000000
$12: 818a3f39 80a58875 808401f8 ffffffff
$16: 2e2e2e2e 2e00654c 83bf6554 80b10000
$20: 818a3f6c 83bf6534 00000002 00000004
$24: 80b50000 818a3f34 746f7220 4c6f6361
$28: 81274000 818a3f44 00000001 8075fab8
List a possible caller functions:
----------------------------------
func( 0)=80b1712c
func( 1)=80b14a7c
func( 2)=80027754
func( 3)=8069bfac
func( 4)=8066b078
func( 5)=80763e24
func( 6)=8003795c
func( 7)=80214d90
func( 8)=8003795c
func( 9)=804695ac
func(10)=804698d8
func(11)=8024e530
func(12)=80024c38
func(13)=80229338
func(14)=8025dad8
func(15)=80764164
func(16)=800e9564
func(17)=8024e530
func(18)=8066736c
func(19)=8066736c
List backtrace functions:
----------------------------------
func( 0)=8075fab8
func( 1)=80763e24
func( 2)=80764164
func( 3)=800e9564
func( 4)=800ce6e0
func( 5)=800fa344
func( 6)=8025402c
func( 7)=80255870
func( 8)=80257d20
func( 9)=80259f10
func(10)=800ce6bc
func(11)=800f055c
func(12)=801df874
func(13)=8066e06c
func(14)=8024be54
Please Log in or Create an account to join the conversation.
- tobythetenor
- Offline
- Junior Member
Less
More
- Posts: 92
- Thank yous received: 0
16 May 2014 14:21 #80017
by tobythetenor
Replied by tobythetenor on topic Re: Vigor 2860 Rebooting every couple of minutes
Has anybody heard any news from Draytek on the UPnP reboot problem?
It's been quite a while now.
I also noticed problems with the wireless on ver 4.7.1, but that doesn't bother me so much, as most my wireless devices connect via a separate access point.
It's been quite a while now.
I also noticed problems with the wireless on ver 4.7.1, but that doesn't bother me so much, as most my wireless devices connect via a separate access point.
Please Log in or Create an account to join the conversation.
- saxtonma
- Offline
- New Member
Less
More
- Posts: 1
- Thank yous received: 0
17 May 2014 20:33 #80028
by saxtonma
Replied by saxtonma on topic Re: Vigor 2860 Rebooting every couple of minutes
I've been using a 'test' version of firmware from Draytek UK (Version - 3.7.5_test1) As a result my 2860n has much improved stability and wireless seems much improved and I've had no re-boots for 168 hours - so long as UPnP is disabled! Previously my router would repeatedly re-boot with UPnP enabled or disabled and the wireless performance / throughput was very poor.
Draytek have advised me that the UPnP problem has been fixed and an updated version of the firmware for the 2860 will be released soon.
Draytek have advised me that the UPnP problem has been fixed and an updated version of the firmware for the 2860 will be released soon.
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek