DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2850N rebooting
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank yous received: 0
27 Nov 2013 16:12 #78379
by admin
Forum Administrator
Replied by admin on topic Re: 2850N rebooting
The telnet command is "sys ver dbg" - it can give clues after a reboot (once the router is back up)
Forum Administrator
Please Log in or Create an account to join the conversation.
- samcrawford
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank yous received: 0
28 Nov 2013 09:34 #78380
by samcrawford
Replied by samcrawford on topic Re: 2850N rebooting
Ah yes, we had tried that... nothing listed:
Code:
Router> sys ver dbg
Router Model: Vigor2850n Version: 3.6.4_2471201 English
Profile version: 3.0.0 Status: 1 (0x491e5e6c)
Router IP: 192.168.2.254 Netmask: 255.255.255.0
Firmware Build Date/Time: May 8 2013 09:20:21
Router Name: RT1
Revision: 34929 drayos2011
ADSL Firmware Version: 2471201_A Annex A
!!!Exception debug info is empty!!!
get from address : 80004000
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank yous received: 0
28 Nov 2013 17:35 #78387
by admin
Forum Administrator
Replied by admin on topic Re: 2850N rebooting
Okay. Well, that does at confirm that it's a spontaneous reboot as opposed to a hang.
Forum Administrator
Please Log in or Create an account to join the conversation.
- wildoat
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank yous received: 0
29 Nov 2013 09:39 #78393
by wildoat
Replied by wildoat on topic Re: 2850N rebooting
Im getting reboots with the new 3.6.6 (as I did with 3.6.4) - have gone back to 3.6.3 as this is the most solid firmware for me. Stays up for days. W.
Please Log in or Create an account to join the conversation.
- samcrawford
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank yous received: 0
20 Dec 2013 09:49 #78554
by samcrawford
Replied by samcrawford on topic Re: 2850N rebooting
3.6.6 is still rebooting sadly when this traffic is introduced to the network. We've had the same issue with 3.6.3 and 3.6.4 too.
Furthermore I found that Plex Media Server installed on a laptop will also trigger the reboots.
Any fresh ideas?
Thanks,
Sam
Furthermore I found that Plex Media Server installed on a laptop will also trigger the reboots.
Any fresh ideas?
Thanks,
Sam
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank yous received: 0
21 Dec 2013 16:55 #78566
by voodle
Replied by voodle on topic Re: 2850N rebooting
Well plex is UPnP multicast stuff so what do you have set up on the applications - IGMP page? Are both things (proxy and snoop) on there disabled or enabled?
Please Log in or Create an account to join the conversation.
Moderators: Chris
Copyright © 2025 DrayTek