DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IP6

  • dave32
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 Aug 2013 18:09 #77282 by dave32
IP6 was created by dave32
Hi,

is it possible to have both IP4 and IP6 active on the same Wan port?

Please Log in or Create an account to join the conversation.

More
07 Aug 2013 18:41 #77284 by voodle
Replied by voodle on topic Re: IP6
It is as far as I'm aware, A&A's IPv6 ADSL gives an IP on IPv4 and a full subnet via PPP on IPv6

Please Log in or Create an account to join the conversation.

  • dave32
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
07 Aug 2013 18:54 #77286 by dave32
Replied by dave32 on topic Re: IP6
This is for our leased line, we have both IP4 and IP6 addresses and was just wondering if we can set up both on the same wan port of the draytek routers?

Please Log in or Create an account to join the conversation.

More
07 Aug 2013 22:57 #77293 by voodle
Replied by voodle on topic Re: IP6
on my 2830n+ it can, it should be possible on higher end routers too

Please Log in or Create an account to join the conversation.

More
08 Aug 2013 09:55 #77297 by babis3g
Replied by babis3g on topic Re: IP6
at the moment i am away and using a 2830n it can use both same time ... here my thread (as proof with a greek isp)
http://www.adslgr.com/forum/threads/746525-DrayTek-models-IPv6-%CE%9F%CE%A4%CE%95-(adsl)

Please Log in or Create an account to join the conversation.

  • dave32
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
11 Aug 2013 21:43 #77359 by dave32
Replied by dave32 on topic Re: IP6
Ok,

now got IP6 working on Wan interface

I have the router setup as below

Lan1 - Private IP Range + IP6 Public Range
Lan2 - routed Public Subnet range
Lan3 - routed Public Subnet range
Lan4 - routed Public Subnet range

Problem is, it would appear that as i have Lan 2-4 enabled for public routing it appears to disable nat for LAN 1 interface.

any way to fix this?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami