DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

SKY Fibre - 2830 - wont authenticate

More
09 Aug 2013 08:54 #77319 by voodle
Replied by voodle on topic Re: SKY Fibre - 2830 - wont authenticate
I don't think it's generally available and requires a factory reset to run but if you're on a new beta that adds in a fixed DHCP option 61, please try the telnet command and see if that gives that load of syntax rather than something like 20020203?

Please Log in or Create an account to join the conversation.

  • rorton
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Aug 2013 09:05 #77320 by rorton
Replied by rorton on topic Re: SKY Fibre - 2830 - wont authenticate
OK, telnet gives me the same options that you have seen on the 2860 you had access to. not sure how i remove the option 60 from here though :?

Please Log in or Create an account to join the conversation.

More
09 Aug 2013 09:17 #77321 by voodle
Replied by voodle on topic Re: SKY Fibre - 2830 - wont authenticate
cool :) I think removing it will be hard, replacing it with the option 60 output from the sky router will be easier, especially if you've got a packet capture from it :)

Please Log in or Create an account to join the conversation.

  • rorton
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Aug 2013 09:25 #77322 by rorton
Replied by rorton on topic Re: SKY Fibre - 2830 - wont authenticate
yep, packet capture i have, tying to work the syntax out for the command though...

Please Log in or Create an account to join the conversation.

  • rorton
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Aug 2013 16:21 #77330 by rorton
Replied by rorton on topic Re: SKY Fibre - 2830 - wont authenticate
Managed to have a play today with this, no further luck though.

Thos options when you telnet in dont work as expected.

I can edit what the option 60 is doing, and enter the string that my Sky router outputs, but this still doesnt allow me to authenticate. Wireshark shows the string coming out in option 60

I cant delete or disable option 60, tried that, and it still appears!

Not sure if the sequence of the dhcp options is significant. Option 60 is close to the top on my draytek trace, but further down on the sky router

Sent some more info off to Draytek, see what they come back with....

Please Log in or Create an account to join the conversation.

More
09 Aug 2013 16:36 #77333 by voodle
Replied by voodle on topic Re: SKY Fibre - 2830 - wont authenticate
That's a shame :( Very weird that it still won't work even matching option 60 though

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami