DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Two ADSL lines, Dynamic DNS

  • lectrician
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Jul 2013 21:42 #77104 by lectrician
Two ADSL lines, Dynamic DNS was created by lectrician
I have a Vigor2830 at a site running firmware 3.3.7.1_sb_211801.

It has two ADSL lines connected, one via a Draytek ADSL modem.

The main ADSL line updates fine using the built in Dynamic DNS client, but the second line will never update, no matter what settings I choose (WAN2 only, WAN2 first etc). forcing an update works fine.

I would like to ensure I have two means of remote access, and currently have to login as soon as I see the email that the WAN2 has dropped to ensure the DNS is updated.

Is this a known issue with the firmware?

Please Log in or Create an account to join the conversation.

  • lectrician
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
31 Jul 2013 07:11 #77143 by lectrician
Replied by lectrician on topic Re: Two ADSL lines, Dynamic DNS
Anyone?

Admin?

Please Log in or Create an account to join the conversation.

More
31 Jul 2013 10:06 #77144 by babis3g
Replied by babis3g on topic Re: Two ADSL lines, Dynamic DNS
i am not sure if is firmware issue because personal never used dynamic dns but if is the firmware you can try 3.6.3 is the best stable or latest 3.6.4
If you don't have many settings to do back from the begin manually, i would say to use the *rst* file (clears everything) ...the *all* file will just let same settings

Please Log in or Create an account to join the conversation.

  • lectrician
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Aug 2013 19:34 #77520 by lectrician
Replied by lectrician on topic Re: Two ADSL lines, Dynamic DNS
Thanks.

I have quite a few settings in it, so would use the .all.

I actually am not at the site that often and rely on remote access, and being able to use both lines at any point (should one fail), is nearly a a must.

I have not ever upgraded the firmware remotely - Is it possible?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami