DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor2830Vn wan2

  • steveb-ndr
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jun 2013 10:19 #76638 by steveb-ndr
Vigor2830Vn wan2 was created by steveb-ndr
Bit of an odd issue, with wan2 port.

Model Name : Vigor2830Vn
Firmware Version : 3.6.4_sb_232201

Using a microwave internet link via wan2, the upload speed seems very low, as it's supposed to be 90meg up and down.

Eg... wan2 speed test: download: 71,023... upload 28,289.

If I connect to the microwave link via a laptop (instead of using the Vigor) I get: 53,022 meg upload.

I also replace the Vigor with a ddwrt router... and this gave...

72,479 down and 53,032 up.

I've tried with Qos off, but it's slower upload then 53 meg.

The fastest upload speed seems to be with settings...

Class 1: 1%
Class 2: 1%
Class 3: 1%
Others: 97%
Enable UDP Bandwidth Control: enabled
Outbound TCP ACK Prioritize: enabled
Limited_bandwidth Ratio: 25%

I've turned off the firewall...

Physical Type: Auto Negotiation

Any know issues with Wan2 on this firmware or any other things to try?

Cheers,

Steve

Please Log in or Create an account to join the conversation.

More
17 Jun 2013 11:13 #76640 by babis3g
Replied by babis3g on topic Re: Vigor2830Vn wan2
First of all ... At WAN >> General Setup disable wan 1 ...is important if not using it & report back

If the first will not work ... try the following for testing purposes
Disable QoS & turn off priority for VOIP
Turn off DoS
At physical type give a go with half & full duplex if will make difference

Please Log in or Create an account to join the conversation.

  • steveb-ndr
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Jun 2013 15:11 #76654 by steveb-ndr
Replied by steveb-ndr on topic Re: Vigor2830Vn wan2

babis3g wrote: First of all ... At WAN >> General Setup disable wan 1 ...is important if not using it & report back


wan1/wan3 already disabled.. sorry should have said.

If the first will not work ... try the following for testing purposes
Disable QoS & turn off priority for VOIP
Turn off DoS
At physical type give a go with half & full duplex if will make difference


Done all those... a few variations in download/upload speed... but no major differences.

What I have found, is that if I disable "call filter" and "data filter" I get an extra 10 mb upload... ??

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami