DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

iPhone 4 on WAN3?

  • psykix
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
13 Jun 2013 19:36 #76561 by psykix
Replied by psykix on topic Re: iPhone 4 on WAN3?
Hi,

What do you mean by modem codes??

Please Log in or Create an account to join the conversation.

More
14 Jun 2013 03:11 #76569 by babis3g
Replied by babis3g on topic Re: iPhone 4 on WAN3?

Why do we have a lot of DSL modem codes for customer to choose?

The reason is DSLAM in CO site (ISP) may have different DSL brands or different versions. Those may cause interoperability (IOP) issue between DSL modem and DSLAM. For example, DSL cannot synchronize well or cannot get high rate or high performance.

Therefore, we offer different modem codes for customer to try if they meet IOP problem. In general, we suggest using the standard one for most areas should be no problem in working with this version.



If you let me know your current exact model i will send you the link to get the ones i mentioned

Please Log in or Create an account to join the conversation.

  • psykix
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Jun 2013 07:38 #76571 by psykix
Replied by psykix on topic Re: iPhone 4 on WAN3?
Aha..

My model is the 2830n (single band)

Cheers :-)

Please Log in or Create an account to join the conversation.

  • psykix
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Jun 2013 10:37 #76575 by psykix
Replied by psykix on topic Re: iPhone 4 on WAN3?
Actually, I'm not going to bother with the Draytek - I plugged the Billion in, and my line speed went to just over 2Mbps. (it's limited at the ISP to that, as it becomes extremely flaky when the speed increases above)

So, quite pleased now - thanks for all your input though :-)

Please Log in or Create an account to join the conversation.

  • psykix
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Jun 2013 13:13 #76698 by psykix
Replied by psykix on topic Re: iPhone 4 on WAN3?

babis3g wrote:

Why do we have a lot of DSL modem codes for customer to choose?

The reason is DSLAM in CO site (ISP) may have different DSL brands or different versions. Those may cause interoperability (IOP) issue between DSL modem and DSLAM. For example, DSL cannot synchronize well or cannot get high rate or high performance.

Therefore, we offer different modem codes for customer to try if they meet IOP problem. In general, we suggest using the standard one for most areas should be no problem in working with this version.



If you let me know your current exact model i will send you the link to get the ones i mentioned



Well.. turns out after my 2nd ADSL line going in today that the Billion doesn't actually support load balancing!!!

GRRR!!

So.. I'm back to the Draytek - can you send me the link for the modem codes please?

Thanks very much!

Please Log in or Create an account to join the conversation.

  • psykix
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Jun 2013 14:08 #76702 by psykix
Replied by psykix on topic Re: iPhone 4 on WAN3?
Sorry to reply to my own posts!

Plugged the Draytek back in and getting the same speed as the Billion, so that's cool :-)

However, how can I configure DDNS in a load balancing scenario?

Cheers!

Please Log in or Create an account to join the conversation.

Moderators: Chris