DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Routing from LAN to LAN via WAN

More
10 Jun 2013 20:23 #76480 by louis-m
Routing from LAN to LAN via WAN was created by louis-m
I'm trying to set this up on a 2850 and struggling.
Basically I have 2 routers connected via an MPLS network.
The first router has a WAN IP of 192.168.200.1/32 and the second router has a WAN IP of 192.168.200.4/32.
Both routers can ping each other and I can ping from the LAN of one to the WAN of the other.
The LANS are 10.1.1.0/24 & 10.1.2.0/24 respectively.

I have placed the static routes into both routers:
ROUTER 1 = route 10.1.2.0/24 (ROUTER 2 LAN) via 192.168.200.4 (ROUTER 2 WAN)
ROUTER 2 = route 10.1.1.0/24 (ROUTER 1 LAN) via 192.168.200.1 (ROUTER 1 WAN)

I think NAT is blocking this so I'm looking to try and change this to routing only but it's proving to be difficult.
It's fairly easy to do on a cisco as you just put the interface addresses in and configure the static routes and it works.

But the drayteks? This is a 2850 and no matter what combination I try, I just can't communicate from one LAN to another LAN.
Any help would be appreciated.
Louis

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami